News

Do you know how many ways to install signage?

Update:24-05-2022
Abst:

  Paste: This method is widely used, and the adhes […]

 

Paste:
This method is widely used, and the adhesives used include glass glue, AB glue, foam glue, all-purpose glue, sponge glue, double-sided glue, chloroform, structural glue, etc. According to the different materials and foundations, the length of use time, the difference in the installation environment, indoor and outdoor dry and wet, temperature difference and other conditions, choose the appropriate adhesive.

Prosthesis paste hanging type:
This is also used for some hemming marks. For example, when the base of the wall is marble, glass, stainless steel, etc., it is not allowed to punch holes, and it is relatively strong and flat. This method is more suitable. First measure the position, use AB glue to stick organic edge strips or angle aluminum and other materials on the wall, then hang the logo fold, fine-tune the position, and fix it with glass glue.

Hanging fixed type:
This is the method used for some folded logos, which are large in size, heavy in weight, and cannot be installed with foam filling and pasting. First determine the punching point, punch holes with an impact drill, screw on a rubber plug and a self-tapping screw, when only one screw is used, a hole must be punched in the middle of the upper edge of the sign to keep it level, and then the sign is folded and hung. On the screw, after adjusting the position, seal the glass glue around it to fix it.

Decorative screw fixing type:
This method is designed in advance, and the design draft has clearly indicated that this method is generally used for acrylic panel clip art, mainly because the positioning of the screws must be accurate, otherwise it cannot be installed correctly.

0
CONTACT US